WAVE TECH 1X RINGS

||WAVE TECH 1X RINGS
WAVE TECH 1X RINGS2018-08-28T19:12:41+00:00

WAVE™ TECH 1X

The Wave™ tooth pattern swings right to left alternating lateral force to each chain link to actively retain the chain. This design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions.

WAVE™ TECH 1X

The Wave™ tooth pattern swings right to left alternating lateral force to each chain link to actively retain the chain. This design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions.

Designed with analysis of drivetrain friction, the Wave™ tooth actively engages the chain but generates much less  wear than competing designs — spreading the load over large surface areas instead.

Licensed and developed in conjunction with Mountain Racing Products.

Tough enough for Enduro, Downhill, and also weight conscious for XC and Cyclocross riding.

These Wave™ Tech rings are machined from 7075-T6 aluminum and Hard Anodized to take a beating.

SPECS

  • 94 BCD MTN : 30T
  • 104 BCD MTN : 30T, 32T, 34T, 36T and 38T
  • DM MTN : 30T, 32T, 34T and 36T Boost or Non-Boost
  • 110 BCD ROAD : 38T, 40T and 42T for CX / Gravel
  • DM ROAD / CX : 38T, 40T and 42T for CX / Gravel
  • All rings are 10/11 and 12sp chain compatible
  • Stamped and machined 7075-T6 Al manufacturing with hard black anodizing for durability
  • REAR DER- Must use a ‘CLUTCH’ type rear derailleur
BUY WAVE™ TECH RINGS

SPECS

  • 94 BCD MTN : 30T
  • 104 BCD MTN : 30T, 32T, 34T, 36T and 38T
  • DM MTN : 30T, 32T, 34T and 36T Boost or Non-Boost
  • 110 BCD ROAD : 38T, 40T and 42T for CX / Gravel
  • DM ROAD / CX : 38T, 40T and 42T for CX / Gravel
  • All rings are 10/11 and 12sp chain compatible
  • Stamped and machined 7075-T6 Al manufacturing with hard black anodizing for durability
  • REAR DER- Must use a ‘CLUTCH’ type rear derailleur
BUY WAVE™ TECH RINGS