SPECIFICATIONS | |
---|---|
INSTRUCTIONS | ⚠️ VIEW MANUAL HERE |
E-CRANK CARBON | Allloy, Alloy-HD or Carbon eCranks optimized/shaped for Bosch and Yamaha motors below. Please Read! |
BUY THIS IF : | You want wanting to change length or upgrade your eCrank for the Bosch, Yamaha or Giant motors. MTN or Road use |
MOTOR | BOSCH "CX" Motor#BDU37 with ISIS spindle BOSCH "SX" Motor#BDU31 with ISIS spindle GIANT SyncDrive Pro -With ISIS spline spindle YAMAHA PW-X -With ISIS spline spindle |
MATERIAL | Left & Right arm set Carbon Fiber or Forged Alloy |
AVG. WEIGHT | 380g : Carbon (165mm w/boots) 485g : Alloy Arm set 558g : HD Alloy Arm set |
Q-Factor | These are the Qfactors when you install this crank on these motors : Q = 180mm : on Bosch BDU37 or BDU31 motor Q = 170mm : on Giant/Yamaha motor |
MAIN BOLT | 8mm AL main crank bolt for Install/Self-Extract | 50Nm torque
Our eCranks with ISIS Spline use our replaceable M24 alloy Main bolt/Self extractor |
TECH | C.R.A.F.T. Cabon Mfg. |
VIP NOTE | MOTORS - Check your Bosch/Yamaha/giant motor spindle type. These cranks are made for "ISIS" steel spline spindle motors. They install on Bosch, Yamaha, Giant motors and a few other brand motors with steel ISIS Spindles.
These cranks do NOT install on Bosch "Micro-ISIS" or "Square Taper" spindle motors ⚠️ NOT FOR BOSCH BDU38 "CX" 2-BOLT MOUNT MOTOR ⚠️ |