SPECIFICATIONS | |
---|---|
INTRUCTIONS | ⚠️ VIEW MANUAL HERE |
E-CRANK CARBON | E-CRANKS that are for eMTN Brose, Fazua-R50, TQ-HPR50 or Bafang M800 motor |
BUY THIS IF : | You have an eMTN bike with either a Brose Mag family, FazuaR50, TQ-HPR50 Bafang M800 motor |
MOTOR | BROSE Mag Family-With steel ISIS spline spindle FAZUA-R50 -With steel ISIS spline spindle TQ-HPR50 -With steel ISIS spline spindle Bafang M800 -With steel ISIS spline spindle |
MATERIAL | Left & Right arm set | Carbon Fiber | Rubber protective boots |
AVG. WEIGHT | ALLOY = 520g CARB = 460g |
Q-Factor | Qfactors when you install this crank on these motors : Q = 171mm : on FazuaR50 motor Q = 171mm : on TQ-HRP50 motor Q = 183mm : on Bafang 800 motor Q = 186mm : on Brose Mag motor Q = 186mm : on SRAM Powertrain motor |
MAIN BOLT | 8mm AL main crank bolt for Install/Self-Extract | 50Nm torque
Our eCranks with ISIS Spline use our replaceable M24 alloy Main bolt/Self extractor |
TECH | C.R.A.F.T. Cabon Mfg. |
VIP NOTE | VIP – Do NOT order this crank if you own a Specialized Levo/Kenevo/Vomo/Vado. If you have a Specialized e-bike with steel ISIS spline spindle then GO HERE. |